What are the tools usually used to install the purification plate in the purification room
净化间车安装净化板通常使用工具有哪些
1, profile cutting machine: saw blade diameter is not less than 280mm, there should be reliable safety, cut out the profile should be accurate size, regular without burrs.
1、型材切割机：锯片直径不小于280mm，应有可靠的安全性，切出的型材应尺寸精准、规整无毛刺。
It is mainly used for cutting aluminum profiles and accessories of color steel sandwich panels.
主要用于切割彩钢夹芯板所配套的铝型材、附件。
2, portable toothless saw: mainly used in the color steel sandwich board holes, holes, easy to use, regular holes, can also be used for cutting color steel plate.
2、手提式无齿锯：主要用于在彩钢夹芯板上开孔、开洞，使用方便，开孔规整，也可用于彩钢板的切割。
3, 185 purification plate saw machine: used for cutting purification workshop purification board, large noise, easy to use.
3、185净化板锯机：用于切割净化车间净化板，噪声较大、使用方便。
4, portable circular saw: mainly used in the color steel sandwich board to open holes, easy to use, large noise.
4、手提式圆盘锯：主要用于在彩钢夹芯板上开洞，使用方便，噪声较大。
5, Angle grinder: used for small openings on the color steel sandwich board.
5、角磨机：用于在彩钢夹芯板上开小口。
6, electric hammer: used to purify the cement floor and wall drilling, installation of expansion bolts and plastic expansion plug.
6、电锤：用于净化车间内水泥地面及墙面上钻孔，安装膨胀螺栓及塑料胀塞。
7, hand drill: when installing the clean plate of the purification workshop, drill the bolt hole to the maximum drilling diameter Φ6, voltage 220V, power
7、手电钻：安装净化车间洁净板时钻螺栓孔，以最大钻孔直径Φ6、电压220V、功率
230W and 1350r/min are recommended.
230W、转速1350r／min为宜。
8, pull riveting gun: there are electric, manual points, for the riveting of the core rivet.
8、拉铆枪：有电动、手动之分，用于抽芯铆钉的铆接。
9, laser line projector: projection of vertical lines, horizontal lines and orthogonal lines, etc., for pay-off, calibration.
9、激光投线仪：投射垂线、水平线及正交线等，用于放线、校准。
10, level, square, tape measure, etc
10、水平尺、方尺、卷尺等
